The Carr Lock® System requires that each Carr Lock® Clamp be used together with a Carr Lock® Receiver Bushing – either the back-mount type shown here, or the face-mount type. The clamp's locking balls engage the angled ID section of the Receiver Bushing, pulling the clamp firmly downward. Back-Mount Receiver Bushings are installed in the subplate from below, with a slight press fit. Made in USA. Back-Mount Receiver Bushings are available for all Carr Lock® Clamp shank diameters: 13mm 16mm 20mm 25mm 30mm 35mm 50mm
Additional information
Product Type | |
---|---|
Inside Diameter | 13 mm |
Diameter (K) | 20.04/20.03 mm |
Counter Bore Diameter (N) | 25 mm |
Minimum Subplate Thickness (M) | 20 mm |
Material | 4340 Steel |
Finish | Black Oxide |
Depth (P) | 6.93 to 6.88 mm |
Height (B) | 12.1 mm |
Standards Met | DFARS;RoHS Compliant |
Hole Diameter (K) | -0.003/-0.013 mm |
Hole Diameter (N) | 25.9/26.1 mm |